A gun can be a finely-tuned piece of mechanical equipment, capable of functioning precisely and seamlessly in your hands. But, like any mechanical marvel, your gun is going to need the utmost care and maintenance to function properly… otherwise it could fall into disrepair and encounter all sorts of problems that leave it less than functional or worse, hazardous to use.
If your gun has a mechanical problem, the best thing you can do for it is to visit a gun shop in Olathe, KS to seek the assistance of a professional in setting things right. Trying to fix your gun yourself or attempting to let anyone short of a seasoned professional handle it could result in even more damage or malfunction—the problems only get worse from there.
So, what warrants a visit to the gun shop in Olathe, KS and what might you have to look out for if you’re dealing with a gun that hasn’t been used or cleaned in a while? Take a look at a few of the more common problems you might encounter:
- Bore obstructions: If the bore of your barrel is obstructed by dirt, debris or anything else, it’s going to change the trajectory of a projectile, meaning your accuracy is going to be off. Worse yet, bore obstructions can continually be impacted into your barrel, causing issues further down the line when it comes to degradation of the gun itself.
- Cracked parts: You might not realize it, but the tremendous amount of force that’s produced when your gun is fired can take a toll on the firearm itself. Thankfully, today’s models are made with tempered steel, which is highly resilient and able to stand up to decades and decades of use. Older guns, however, might see Father Time make his mark in the form of a pressure crack—usually on the chamber, bolt or stock. Cracks need to be repaired immediately, as continued force can strain these areas and cause major malfunctions.
- Timing issues: If your firearm has timing issues is could result in things like misfiring, which become a safety hazard very quickly. To have your timing adjusted your gun will need to be disassembled and repaired by a professional, who will have the appropriate tools to specifically calibrate the timing of your gun based on its caliber.
- Malfunctioning safety: This is perhaps the most dangerous issue of all—a safety that doesn’t disable the firing mechanism is a useless safety and one that is bound to get someone hurt. If your safety isn’t doing its job, seek professional help for gun repairs immediately and do not use your gun until the issue is fixed!
- Firing pin deformities: Over time your firing pin is going to see a lot of action and occasionally, it can become warped or deformed—especially for frequent shooters. A deformed firing pin can actually lead to primer ruptures, which can damage your gun and cause a myriad of firing issues.
All of the above issues can be quite common, which makes constant inspection of your firearm essential to gun ownership. If you find an issue present in your next inspection, be sure to visit a gun store in Olathe, KS to get professional advice on how to proceed with fixing it.